Contents of the OSH Rules (Uttar Pradesh)

The Uttar Pradesh Occupational Safety, Health and Working Conditions Rules, 2026

Rule 136. Intimation to Chief Inspector-cum-Facilitator by the occupier of the factory proposed to be engaged in hazardous process under sub-section (5) of section 84

Chapter IX — Special Provisions for Contract Labour Inter-state Migrant Workers, Audio- Visual Workers and Beedi and Cigar WorkersPart V — FactoryMade under The Occupational Safety, Health and Working Conditions Code, 2020Notification No. 962/XXXVI-03-2026-1903305, 27 Aug 2026

Official text

(1) The occupier/employer shall disclose the information of the factory involving hazardous process under sub-section (5) of section 84, namely:-(a) The occupier of every factory involving hazardous process shall identify all the hazards involved both from actual operations and the chemical reactions. The properties of the raw materials, final products to be made and any by-products derived during the process shall be carefully studied and provisions shall be made for dealing with any hazards including effects on employees, which may occur during manufacture;

(b) information in the following format giving details of the process, its hazards and steps taken or proposed to be taken from the design stage to disposal stage for ensuring the safety as mentioned in sub-rule(1) shall be sent to Chief Inspector-cum-Facilitator and Inspector-cum-Facilitator through online mode at the earliest and in no case less than 30 days before commencing manufacture, handling or storage involving hazardous process:-

Information to be furnished by Occupier of Hazardous Process Industry:

(a) Name of Factory: …………………………

(b) Address …………………………

(c) Manufacturing process details ………………… (in case of chemical factory material balance of all the reactions shall be enclosed)

(d) Raw Materials used (Name, Mode of storage, Maximum storage Capacity) …..........................................

(e) Finished Products ( Name & Maximum storage Capacity) ………………

(f) Intermediate Products ( Name & Maximum storage Capacity) ………………

(g) Hazards identified (process hazards, storage and handling of chemicals based on HAZOP shall be enclosed in case of chemical factory) …………………………..

(h) Remedial measures (inbuilt safety systems for equipment, process control, engineering controls and administrative controls): …………………………

(i) Details for disposal of hazardous waste: Occupier with name Signature of

(2) The above information shall be revised and updated immediately after change of any of the above information, technological advancement or once in three years through online.

(3) Any further information sought by the Chief Inspector-cum-Facilitator or Inspector-cum-Facilitator for compliance of the above provisions shall also be furnished.

Source: The Uttar Pradesh Occupational Safety, Health and Working Conditions Rules, 2026, Notification No. 962/XXXVI-03-2026-1903305 — Uttar Pradesh Gazette Extraordinary, 27 August 2026, p. 345 of the PDF. Open our copy at p. 345 · official download · all sources

The rules were made in Hindi. The English text is the translation published by order of the Governor under clause (3) of Article 348 of the Constitution, which makes it the authoritative text in English. Rule headings are printed as marginal notes.