Schedule XXXIV

MANUFACTURING OR MANIPULATION OF FERTILIZERS

1. Application.—This Schedule shall apply in respect of all factories or any part thereof in which

the process of manufacturing or manipulation of fertilizers hereinafter referred or as the said manufacturing

process is carried on.

2. Definitions.—For the purposes of this Schedule—

(a) "fertilizer" means any substance used or intended to be used as a fertilizer of the soil

and/or crop and specified in Part A of Schedule I of the Fertilizer (Control) Order, 1985

and includes a mixture of fertilizer and a special mixture of fertilizers and any other

product, as may be notified from time to time by the State Government.

(b) "mixture of fertilizers" means a mixture of fertilizer made by physically mixing two or

more fertilizers, with or without inert material in physical or granular form and includes a

mixture of NPK (Nitrogen-Phosphorus-Potassium) fertilizers, a mixture of micronutrient

fertilizers.

(c) "efficient exhaust draught" means localised mechanical ventilation for removal of

smoke, gas vapour, dust, fume or mist so as to prevent them from escaping into the air of

any workroom in which work is carried on. No exhaust draught shall be considered

efficient if it fails to remove smoke generated at the point where such gas, fume, dust,

vapour or mist originates from the process;

(d) “Breathing apparatus” means (1) a helmet or face piece with necessary connections by

means of which a person using it in a poisonous, asphyxiating or irritant atmosphere

breaths ordinary air, or (2) any other suitable apparatus approved in writing by the Chief

Inspector-cum-Facilitator.

(e) "first employment" shall mean first employment in any manufacturing process to

which this Schedule applies and shall also include re-employment in the said

manufacturing process following any cessation of employment for a continuous period

exceeding three calendar months.

(f) "manipulation" including mixing, blending, formulating, filling, emptying, packing or

otherwise handling.

3. Instruction to workers— Every worker on his first employment shall be fully instructed on the

properties including dangerous properties of the chemicals handled in the said manufacturing process and

the hazards involved. The workers shall also be instructed in the measures to be taken to deal with any

emergency, such instructions shall be repeated periodically.

4. Prohibition relating to employment of women or young persons— No pregnant women young

person shall be employed or permitted to work in any room in which the said manufacturing process or

mixing of fertilizers is carried on or in any room in which fertilizer is stored.

Provided that women workers may be employed with their consent to work subject to the

following conditions :-

(1) International Safety standards shall be adopted by the occupier for providing Occupational

Safety and Health (OSH).

(2) The occupier shall, as far as possible, modernise the above processes/places from time to time

and will use modern equipments.

(3) Women workers who are feeding mothers shall be exempted from the Employment.

5. Instruments— All instruments such as pressure gauges, thermometers, flow meters and

weighing machines shall be tested at regular intervals by a competent person, and records of these tests

shall be kept in a register.

6. Safety valves— Every still and every closed vessels in which gas is produced or into which gas

is passed and in which the pressure is liable to rise to a dangerous degree shall have attached to it a pressure

gauge, and a proper safety valve or other equally efficient means to relieve the pressure, maintained in good

condition and shall be tested at regular intervals by a competent person, and records of these tests shall be

kept in a register.

7. Examination, testing and repair of plant— Examination, testing and repair of pressure vessel or

plant parts which have been in contact with ammonia and other chemicals, or which is above atmospheric

pressure, shall only be carried out under proper supervision. Examination and testing of pressure vessel or

plant parts shall be carried out at regular intervals by a competent person and records of these tests shall be

provided in the prescribed Form meant for the pressure plant.

8. Leakage detection of ammonia & other chemicals- Leakage of ammonia and other chemicals

through pressure vessel or plant parts shall be detected by chemical vapour detection system. Leakage of

ammonia may also be detected by using sulfur sticks.

9. Alarm system— (a) Plant and Parts of the buildings shall be fitted with alarm systems,

automatic cut-offs or other devices to prevent overcharging or otherwise endangering the plant.

(b) Alarm system shall be activated automatically by receiving signals from chemical vapour

sensors in case of leakage of ammonia and other chemicals through pressure vessel or plant parts.

(c) The amount of ammonia and other chemicals taken into a building in bulk containers at any

one time shall be kept as low as practicable.

10. Breathing apparatus—

(a) There shall be provided in every factory where dangerous gas or fume is liable to escape a

sufficient supply of—

(i) breathing apparatus of an approved make for the hazards involved ;

(ii) oxygen and suitable means of its administration; and

(iii) life-belts.

(b) The breathing apparatus and other appliances required by this Schedule shall :

(i) be maintained in good order and kept in an ambulance room or in some other place approved in

writing by the Chief Inspector-cum-Facilitator, and

(ii) be thoroughly inspected once every month by a competent person, appointed in writing by the

occupier and record of their condition shall be entered in a book provided for that purpose, which shall be

produced when required by an Inspector-cum-Facilitator.

(c) Workers shall be trained and given a periodic refresher course in the use of breathing

apparatus and respirators.

(d) Respirators shall be kept properly labeled in a clean dry light-proof cabinets, and if liable to be

affected by fumes, shall be protected by suitable containers. Respirators shall be dried and cleaned after use

and shall be periodically disinfected.

11. Exhaust draught— Where dust, fume, gas or vapour is produced in the process, provision shall

be made for removing them by means of an efficient exhaust draught so contrived as to operate on the dust,

fume, gas or vapour as closely as possible to the point of origin.

12. Food, drinks and smoking prohibited in the workroom— (1) No food, drink, tobacco, pan or

supari shall be brought into or consumed by any worker in any workroom in which the said manufacturing

process is carried out.

(2) Smoking shall be prohibited in any workroom in which the said manufacturing process is

carried out.

13. Protective clothing and protective equipment— (1) Protective clothing consisting of long

pants and shirts or overalls with long sleeves and head coverings shall be provided for all workers

employed in the said manufacturing process.

(2) Protective equipment consisting of rubber gloves, gum boots, rubber apron, chemical safety

goggles shall be provided for all workers employed in the said manufacturing process.

(3) Protective clothing and equipment shall be maintained in good condition.

14. Ventilation— In every workroom or area whereas fertilizers is manufactured or manipulated,

adequate ventilation shall be provided at all times by the circulation of fresh air.

15. Medical Examination by a Factory Medical Officer — (1) Every worker employed in the

processes mentioned in Paragraph 1 shall be examined by the Factory Medical Officer within 15 days of his

first employment. Such examination shall include tests for determination of the ammonia and other

chemicals in the blood and urine, pulmonary function test, EEG test, memory test and other tests as

prescribed by the Factory Medical Officer. No worker shall be allowed to work after 15 days of his first

employment in the factory unless certified fit for such employment by the Factory Medical Officer.

(2) Every worker employed in the said processes shall be re-examined by the Factory Medical

Officer at least once in every six calendar months. Such examination shall, wherever the Factory Medical

Officer considers appropriate, include tests as specified in sub-paragraph (1).

(3) The Factory Medical Officer after examining a worker, shall issue a certificate of Fitness in

Form-8. The record of re-examination carried out shall be entered in the health register Form-7 shall be kept

in the custody of manager of the factory. The record of each examination carried out under sub-paragraph

(1) and (2), including the nature and the results of the tests, shall also be entered by the Factory Medical

Officer in a Health Register in Form-7.

(4) The Certificate of Fitness and the Health Register shall be kept readily available for inspection

by the Inspector-cum- Facilitator.

16. Exemption— If in respect of any factory, the Chief Inspector-cum- Facilitator is satisfied that

owing to the exceptional circumstances or the infrequency of the said manufacturing process or for any

other reason which he shall record in writing all or any of the provisions of this Schedule are not necessary

for the protection of the workers employed in the factory, he may by a certificate in writing exempt such

factory, from all or any of the provisions on such condition as he may specify therein, such certificate may

at any time be revoked by the Chief Inspector-cum- Facilitator after recording his reasons therefor.