Schedule XXXII

(See rule 84) CENTRIFUGAL MACHINES

1. Definition: -“Centrifugal Machines” include centrifugal extractors, separators and driers.

2. Every part of a centrifugal machine shall be

a) Of good design and construction and of adequate strength;

b) Properly maintained; and

c) examined thoroughly by a competent person at regular intervals.

3. Interlocking guard for drum or basket-

a) The cage housing, the rotating drum or basket of every centrifugal machine shall be provided with

a strong lid. The design, construction of the cage as well as the lid should be such that no access is

possible to the drum or basket when the lid is closed.

b) Every centrifugal machine shall be provided with an efficient interlocking device that will effectively

prevent the lid referred to in sub-paragraph (1) from being opened while the drum or basket is in

motion and prevent the drum or basket being set in motion while the lid is in the open position.

4. Braking arrangement:- Every centrifugal machine shall be provided with an effective arrangement

capable of bringing the drum or basket to rest within as short a period of time as reasonably practicable

after the power is cutoff.

5. Operating speed:- No centrifugal machine shall be operated at a speed in excess of the manufacturers

rating which shall be legibly stamped at easily visible places both on the inside of the basket and on the

outside of the machine casing.

6. Exceptions:—Sub-paragraph (2) of paragraph 3, paragraphs 4 and 5 shall not apply in case of top lung

machines or similar machines used in the sugar manufacturing industry.