Form XXVII

(See Rule 54)

[Particulars of rooms in the factory]

yrotcaf

ni

moor

foemaN

Dimensions in feet

teef

erauqs

ni

aera latoT

yrenihcam

yb deipucco

aera

roolF

moor

eht

ni

ecaps

gnihtaerB

.)teef

cibuc

ni

stnetnoc(

moor

eht

ni ria

fo

emulov

latoT

srood

fo ezis

dna

rebmuN

Ventilation

htgneL htdaerB

moor

eht

fo yticapac

mumixaM

snosrep

fo rebmunmumixaM

smoor

eht

ni

deyolpme

eb ot

dednetni

-krow

a

sa

desu

eb

ot si

moor

eht

rehtehW

ylno

egarots

rof moor

noitcurtsnoc

fo etaD

skrameR Height

mumixaM muminiM egarevA

ezis

dna

rebmuN

sgninepo

swodniw

fo

ezisdna

rebmuN

sgninepo

thgilyks

fo

teef

erauqs

ni

aera

latoT

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Signature of the Occupier......................

Signature of the Manager.......................

Questionnaire Annexed to Form XXVII

Careful attention to the questionnaire will assist in drawing up the plans in accordance with the law,

and thus prevent delay in dealing with the plans.

Note: The site-plans should be draw to a minimum scale of 100'-1" and the other plans drawn to a

minimum scale of 10'-1".

1. Plans—

(a) Has a site-plan showing the immediate surroundings including adjacent buildings and

other structures, roads, drains, etc., been submitted in triplicate.

(b) If there is a system of underground sewage within 100 ft. of the factory, has its position

been shown in the site plan ?

(c) Have the direction i.e., north, south, east and west been shown on the site-plans as well

as on the detailed plans ?

(d) Have the municipal nos. or the field nos. of the premises and the surrounding areas been

shown on the site-plan ?

(e) Have the factory premises been clearly demarcated in the site-plan in distinctive colour ?

(f) Have the detailed plans of the factory indicating all relevant details " relating to doors,

windows, ventilators, fire escapes, etc., been submitted in triplicate ?

(g) Are all new buildings, parts of buildings (if extensions) or alterations in existing buildings

shown by boundaries duly marked in a distinctive colour ?

(h) Are all rooms, sheds, enclosures, etc., serially numbered inside a circle on the plans,

corresponding to the serial entry in Form XXVII?

(i) Are the outlines of all rooms, sheds, enclosures, etc., shown in the site-plan and allotted

the same number as in Item 1(h) above?

(j) Is the Sectional elevation of such a room or shed, etc., shown separately?

(k) Is the minimum and 'maximum height of every room, shed, etc., shown clearly in the

Sectional elevation ?

(l) Is the material of which the roof is constructed indicated the Sectional elevation?

(m) Are the heights of all the workrooms in accordance with the provisions of Rule 55 as

under :

(i) Is the minimum height 20 ft. with C. I. sheet roofing ?

(ii) Is the minimum height 14 ft. with A. C. sheet roofing or R.B./R. C. C. roofing ?

(iii) Has an inner ceiling of a heat resisting material with an air gap of at least 4" been

provided at a minimum height of 14 ft. and the name of the heat resisting material

given?

(iv) Has an exemption been sought for a height of up to 12 ft. R.B/R. G. C. roofing?

(v) Has an exemption been sought for on the assurance of not employing more than

100 employees in the factory on any day ?

(n) Is the minimum distance of the nearest building from latrines and urinals shown on the

plans?

(o) Is the minimum distance of the nearest well, hand-pump or other drinking water centres

shown in the drawing ?

(p) Are water centres shown on the plans ?

(q) Are the sizes of all the doors and ventilators shown on the plans along with their exact

position?

(r) Are all the drains, pipes and sewers for carrying sullage sewage water effluent and

waste products running within the factory premises constructed and shown in the plans ?

(s) Are the positions of various machines fitted or proposed to be fitted shown in the

drawing s together with their names ?

2. Form - XXVII

(a) Is Form XXVII submitted in triplicate, filled in for all workrooms, godowns, etc. which are

proposed to be constructed or extended ?

(b) Have the internal dimensions only been entered in all the columns of Form XXVII?

(c) Is the breathing space of workroom, shed, etc., calculated as shown below:

Floor area of room x its mean height (height above 14 ft. has to be left out of calculation).

(d) Is the maximum capacity entered in Column No. 15 of Form XXVII the maximum number

of persons shown as the lower value of the two calculations shown below :

(i) Floor area of a room less area occupied by machinery in the room divided by 36

[Rule 55(2)].

(ii) Breathing space [as in (c) above] divided by 500.

(e) Have the maximum number of persons as worked out above (lower value) been also

shown on the plans for each workroom corresponding to Column No. 15 of Form XXVII ?

(f) Is the window, ventilator and skylight area provided at the minimum rate of 1 sq. ft. to

every 15 sq. ft. of floor area of the room ? (Section 23 (2) (II) & its rule) ?

(g) Can the windows and skylights under Columns Nos. 12 and 13 of Form XXVII Ball be

opened for ventilation ?

It is recommended that windows and skylights may be provided one opposite to another

so as to provide cross ventilation.

(h) Has a flow chart of the manufacturing process supplemented by its brief description in

various stages been submitted in triplicate ?Rule 54(1) (b)

3. Doors and ventilators.—

(a) Is every work room provided with at-least two doors or exits ?

(b) Is the minimum size of every door or exit 6'-6"x3'

(c) Have any doors of ventilators in common with two adjacent rooms been counted in both ?

(d) Are all the doors opening outwards ?

(e) Do the windows and skylights entered under Cols. 12 and 13 of Form XXVII Actually

serve the purpose of ventilation ?

4. Fire Escapes.—(In case of buildings of more than one story

(a) Are two fire escapes provided on either side of the building ?

(b) Are the fire escapes accessible from every room in the upper floor 3

(c) Is any part of the factory building further (along the line of travel) than 150 ft. from the fire

escape stair ?

(d) Have the particulars given against Items 4(a), (b) and (c) above been also clearly shown

in the various drawings being submitted ?

(e) Is the setback area of the factory and its premises uncovered and free from obstruction?

5. Latrines and urinals.—

(a) Are the latrines and urinals provided separately for men and women?

(b) Are these sufficient to meet the requirements of Section 23(2)(viii) read with its Rules ?

(c) Is the surrounding ground up to a distance of 4 ft. all round of impermeable material?

(d) Is the surrounding ground raised to at least 6" above the ground level?

(e) Is any latrines, ventilator or opening in the proximity of any opening of the main building?

(f) Do any latrines or urinals communicate with any work room without any intervening

space open to the sky ?

(g) Are the latrines of the flush type ?

(h) Are all the drains, pipes and sewers for carrying sullage, sewage water effluent and

waste products running within the factory premises constructed of impermeable

material?

(i) Are the drains of flush type latrines connected to the drainage system of the local

Boards?

(j) Is an efficient system of septic tanks provided if no drainage system exists?

(k) Are the latrines provided with roofing?

6. Drinking water.—

(a) Is the drinking water provided from a source provided by the local Board.

(b) Is any well constructed in the premises of the factory for drinking water or humidification

purposes ?

(c) Is the cylinder of the well pucca and impervious to water throughout and up to a depth

not less than the lowest level of sub-soil water ?

(d) Are the positions of water centres including wells, hand pumps situated at least 20 ft.

away from the washing place, latrines and urinals ?

7. Rest shelter, canteen and creches.—If the plans relate to any of these, the following questions

should also be answered—

(i) Rest shelter:

(a) Does the building fully meet the requirements of Section 24(2)(lll) and it's rules.

(b) Is the roof of heat-resisting material ?

(c) Is the height of every room in the rest shelter at least 12 ft. from the floor level to

the lowest part of the roof ?

(ii) Canteen:

(a) Does the building fully meet the requirements of— Section 24(1)(v) and it's rules.

(b) Are the canteen buildings situated not less than 50 yards from any latrines,

urinals, boiler house, coals, stack coals dumps etc.?

(c) What is the minimum height of the buildings of the canteen measured from the

floor level to the lowest part of the roof ?

(iii) Creche :

(a) Does the building of creche meet fully the requirements of— Section 24 (3) and it's

rules.

(b) Is the height of buildings not less than 12 ft. from floor level to the lowest part of

roof ? We certify that the replies given to the questionnaire above are correct.

Signature of Manager. Signature of Occupier.

N. B.— (i) After showing the above details, the plans and site-plan this questionnaire and

Form XXVII should all be submitted in triplicate to the Inspector-cum-facilitator

of the Region concerned for the approval of the Chief Inspector cum facilitator,

Arunachal Pradesh.

(ii) A certificate of stability signed by a person having the qualifications laid down in

Rule 53 shall be submitted on Form XXVIII before the manufacturing process

with the aid of power is begun in the building.